Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

Pages: 1

#1 2020-05-22 05:46:23

lightbord
Contributor
Registered: 2017-07-11
Posts: 4

Find the actual version number of firmware on an RDV4

How can one find the actual version number of the firmware on the RDV4? On connecting with the client/running "hw version" all it says under bootrom and os are "RRG/Iceman/master/release (git)". No version number is shown. Here's the full output of hw version:

[usb] pm3 --> hw version

 [ Proxmark3 RFID instrument ]           

 [ CLIENT ]           
  client: RRG/Iceman          
  compiled with Clang/LLVM 4.2.1 Compatible Apple LLVM 10.0.1 (clang-1001.0.46.4) OS:OSX ARCH:x86_64          

 [ PROXMARK3 RDV4 ]           
  external flash:                  present           
  smartcard reader:                present           

 [ PROXMARK3 RDV4 Extras ]           
  FPC USART for BT add-on support: absent           
          
 [ ARM ]
  bootrom: RRG/Iceman/master/release (git) 
       os: RRG/Iceman/master/release (git) 
  compiled with GCC 5.4.1 20160919 (release) [ARM/embedded-5-branch revision 240496]

 [ FPGA ]
  LF image built for 2s30vq100 on 2019-07-31 at 15:57:16
  HF image built for 2s30vq100 on 2018-09-03 at 21:40:23          

 [ Hardware ]           
  --= uC: AT91SAM7S512 Rev A          
  --= Embedded Processor: ARM7TDMI          
  --= Nonvolatile Program Memory Size: 512K bytes, Used: 280996 bytes (54%) Free: 243292 bytes (46%)          
  --= Second Nonvolatile Program Memory Size: None          
  --= Internal SRAM Size: 64K bytes          
  --= Architecture Identifier: AT91SAM7Sxx Series          
  --= Nonvolatile Program Memory Type: Embedded Flash Memory

Offline

#2 2020-05-22 07:48:00

iceman
Administrator
Registered: 2013-04-25
Posts: 9,538
Website

Re: Find the actual version number of firmware on an RDV4

If you take a look at the start banner you find it.  

[=] Loading Preferences...
[+] loaded from JSON file /home/iceman/.proxmark3/preferences.json
[=] Using UART port /dev/ttyS7
[=] Communicating with PM3 over USB-CDC


  ██████╗ ███╗   ███╗█████╗
  ██╔══██╗████╗ ████║╚═══██╗
  ██████╔╝██╔████╔██║ ████╔╝
  ██╔═══╝ ██║╚██╔╝██║ ╚══██╗     ❄️  iceman@icesql.net
  ██║     ██║ ╚═╝ ██║█████╔╝    https://github.com/rfidresearchgroup/proxmark3/
  ╚═╝     ╚═╝     ╚═╝╚════╝  Release v4.9237 - Ice Coffee ☕


 [ Proxmark3 RFID instrument ]

 [ CLIENT ]
  client: RRG/Iceman/master/release (git)
  compiled with GCC 7.5.0 OS:Linux ARCH:x86_64

 [ PROXMARK3 RDV4 ]
  external flash:                  present
  smartcard reader:                present

 [ PROXMARK3 RDV4 Extras ]
  FPC USART for BT add-on support: absent

 [ ARM ]
  bootrom: RRG/Iceman/master/v4.9237-4-gde8710f8 2020-05-21 22:24:41
       os: RRG/Iceman/master/release (git)
  compiled with GCC 6.3.1 20170620

 [ FPGA ]
  LF image built for 2s30vq100 on 2020-02-22 at 12:51:14
  HF image built for 2s30vq100 on 2020-01-12 at 15:31:16

 [ Hardware ]
  --= uC: AT91SAM7S512 Rev A
  --= Embedded Processor: ARM7TDMI
  --= Nonvolatile Program Memory Size: 512K bytes, Used: 290884 bytes (55%) Free: 233404 bytes (45%)
  --= Second Nonvolatile Program Memory Size: None
  --= Internal SRAM Size: 64K bytes
  --= Architecture Identifier: AT91SAM7Sxx Series
  --= Nonvolatile Program Memory Type: Embedded Flash Memory

Offline

#3 2020-05-22 15:24:57

lightbord
Contributor
Registered: 2017-07-11
Posts: 4

Re: Find the actual version number of firmware on an RDV4

Hi! Thanks for the reply.

The only version number I see is the client version next to the big PM3 logo (which appears to be hardcoded into client/proxmark3.c). I don't see any other version numbers except the GCC versions used to build stuff. Whereas yours has something under the [ARM] section under bootrom seeming to show an actual version number, mine is only "RRG/Iceman/master/release (git)". Here's the full output of launching the client.

[=] Waiting for Proxmark3 to appear...

          
  ██████╗ ███╗   ███╗ ████╗            
  ██╔══██╗████╗ ████║   ══█║           
  ██████╔╝██╔████╔██║ ████╔╝           
  ██╔═══╝ ██║╚██╔╝██║   ══█║     iceman@icesql.net          
  ██║     ██║ ╚═╝ ██║ ████╔╝    https://github.com/rfidresearchgroup/proxmark3/          
  ╚═╝     ╚═╝     ╚═╝ ╚═══╝  pre-release v4.0          
          
[=] Session log /Users/matt/.proxmark3/log_20200522.txt
[=] Using UART port /dev/tty.usbmodemiceman1           
[=] Communicating with PM3 over USB-CDC           

 [ Proxmark3 RFID instrument ]           

 [ CLIENT ]           
  client: RRG/Iceman          
  compiled with Clang/LLVM 4.2.1 Compatible Apple LLVM 10.0.1 (clang-1001.0.46.4) OS:OSX ARCH:x86_64          

 [ PROXMARK3 RDV4 ]           
  external flash:                  present           
  smartcard reader:                present           

 [ PROXMARK3 RDV4 Extras ]           
  FPC USART for BT add-on support: absent           
          
 [ ARM ]
  bootrom: RRG/Iceman/master/release (git) 
       os: RRG/Iceman/master/release (git) 
  compiled with GCC 5.4.1 20160919 (release) [ARM/embedded-5-branch revision 240496]

 [ FPGA ]
  LF image built for 2s30vq100 on 2019-07-31 at 15:57:16
  HF image built for 2s30vq100 on 2018-09-03 at 21:40:23          

 [ Hardware ]           
  --= uC: AT91SAM7S512 Rev A          
  --= Embedded Processor: ARM7TDMI          
  --= Nonvolatile Program Memory Size: 512K bytes, Used: 280996 bytes (54%) Free: 243292 bytes (46%)          
  --= Second Nonvolatile Program Memory Size: None          
  --= Internal SRAM Size: 64K bytes          
  --= Architecture Identifier: AT91SAM7Sxx Series          
  --= Nonvolatile Program Memory Type: Embedded Flash Memory

Last edited by lightbord (2020-05-22 15:25:20)

Offline

#4 2020-05-22 15:46:15

iceman
Administrator
Registered: 2013-04-25
Posts: 9,538
Website

Re: Find the actual version number of firmware on an RDV4

You are not using the lastest source code. And your output indicates that you are not using the release source code either.
Are you on homebrew or something?

Try download latest source, or the release source and compile/flash.

Offline

#5 2020-05-22 18:26:00

lightbord
Contributor
Registered: 2017-07-11
Posts: 4

Re: Find the actual version number of firmware on an RDV4

I downloaded from github back in december of 2019. My intention was to find what version was on the proxmark right now before I flash it. The firmware on there right now is the firmware that came with it.

Offline

#6 2020-05-22 18:51:34

iceman
Administrator
Registered: 2013-04-25
Posts: 9,538
Website

Re: Find the actual version number of firmware on an RDV4

That would explain why there is no version.    The numbers on yours,  is compiler version.

Offline

Pages: 1

Board footer

Powered by FluxBB