Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2020-05-14 19:05:41

JanderPanel
Contributor
Registered: 2020-04-25
Posts: 3

[SOLVED] Bricked PM3 RDV4 - trying to unbrick it

Hi There,

This is my first post, so if made a mistake please tell me and i'll modify accordingly.
I have a Proxmark3 RDV4 with the Bluetooth and battery addon from lab401, I wanted to use it with the Android app from RRG (https://play.google.com/store/apps/details?id=com.rfidresearchgroup.rfidtools&hl=fr)
I understood that i had to flash my pm3 in order to make it work with the app, so I've connected the PM3 in OTG to the phone and started to flash it from the app (very bad idea...) just after my pm3 was not responding and i have know 2 solid red leds on the PM3.

So I've started to look for a way to unbrick it, I have a multi flashing tool (https://lab401.com/products/proxmark-3-rdv4-flash-support?_pos=1&_sid=3acdef5c9&_ss=r) and a raspberry pi so i followed this tutorial :
http://www.lucasoldi.com/2017/01/17/unbrick-proxmark3-with-a-raspberry-pi-and-openocd/

I Have my openocd up and running on the RPI but i'm unsure about the connection between my RPI, the flashing tool and my PM3, because i am not able to find a documentation with a schema of the pins on the flashing tool, i've looked on the forum but i was not lucky so far.

If anyone of you have some info which could help me to revive my PM3, i would be very grateful smile

Last edited by JanderPanel (2020-05-14 21:11:46)

Offline

#2 2020-05-14 19:40:22

gator96100
Contributor
From: Austria
Registered: 2016-03-25
Posts: 177

Re: [SOLVED] Bricked PM3 RDV4 - trying to unbrick it

Offline

#3 2020-05-14 21:10:47

JanderPanel
Contributor
Registered: 2020-04-25
Posts: 3

Re: [SOLVED] Bricked PM3 RDV4 - trying to unbrick it

Thanks a lot ! It worked very well. And my issue is solved

Offline

Board footer

Powered by FluxBB