Proxmark3 community

oscuro

Contributor

Registered: 2017-11-10

Posts: 20

[solved] card mifare classic 1k dead..

My 13.56mhz card has stopped working. I did hf mf restore ok, and then I did csetuid 12345678 and everything went fine, but now proxmark does not detect the card, the card is dead

proxmark3> hf 14a read
Card doesn't support standard iso14443-3 anticollision
ATQA : 00 00
proxmark3>

Last edited by oscuro (2017-11-25 18:57:54)

oscuro

Contributor

Registered: 2017-11-10

Posts: 20

Re: [solved] card mifare classic 1k dead..

proxmark3> hf 14a raw -a -p -b 7 40
received 1 bytes:
0A
proxmark3> hf 14a raw -p 43
received 1 bytes:
0A
proxmark3> hf 14a raw -p -c a0 00
received 1 bytes:
0A
proxmark3> hf 14a raw -p -c de ad be ef 22 08 04 00 46 59 25 58 49 10 23 02
received 1 bytes:
0A 

wewe

proxmark3> hf 14a read
 UID : de ad be ef
ATQA : 00 04
 SAK : 08 [2]

iceman

Administrator

Registered: 2013-04-25

Posts: 9,538

Website

Re: [solved] card mifare classic 1k dead..

Nice learning,  to find the raw commands for reseting your tag.  You could have used the simpler way of using a hf mf c* command (depening on offical/branch)  or a lua script  script run remagic

Ghost

Contributor

Registered: 2017-07-11

Posts: 7

Re: [solved] card mifare classic 1k dead..

I have problem smth like this but tag doesnt answer this commands.

pm3 --> hf search
         
Card doesn't support standard iso14443-3 anticollision         
ATQA : 00 00         
Valid ISO14443-A Tag Found

and nothing more. Have someone ideas how to recovery tag in this case?

zhuminggang

Contributor

Registered: 2017-09-06

Posts: 46

Re: [solved] card mifare classic 1k dead..

It can use with gen1a,not gen2.

Last edited by zhuminggang (2019-12-24 01:16:33)

tng

Contributor

Registered: 2020-07-23

Posts: 9

Re: [solved] card mifare classic 1k dead..

my card is now relived.......

I fixed my died card today (happened after a csetuid just like your, maybe because the card was in a thin plastic bag), thanks to Iceman's tip with "hf mf c*"

proxmark3> hf search
#db# Reading card ...
No or unknown card found, aborting
no known/supported 13.56 MHz tags found

proxmark3> hf mf cwipe
Usage:  hf mf cwipe [card size] [w] [f]
sample:  hf mf cwipe 1 w f
[card size]: 0 = 320 bytes (Mifare Mini), 1 = 1K (default), 2 = 2K, 4 = 4K
w - Wipe magic Chinese card (only works with gen:1a cards)
f - Fill the card with default data and keys (works with gen:1a and gen:1b cards only)
proxmark3> hf mf cwipe f
#db# halt error. response len: 1
Chinese magic backdoor commands (GEN 1a) detected
--blocks count:64 wipe:n fill:y
#db# halt error. response len: 1
OK
proxmark3> hf search     OK again!!!

UID : 01 02 03 04
ATQA : 00 04
SAK : 08 [2]
TYPE : NXP MIFARE CLASSIC 1k | Plus 2k SL1
proprietary non iso14443-4 card found, RATS not supported
#db# halt error. response len: 1
Chinese magic backdoor commands (GEN 1a) detected
Prng detection: WEAK

Valid ISO14443A Tag Found - Quiting Search
proxmark3>

NO MORE PROBLEM:
proxmark3> hf mf csetuid 00700700
uid:00 70 07 00
#db# halt error. response len: 1
Chinese magic backdoor commands (GEN 1a) detected
#db# halt error. response len: 1
#db# Halt error
old block 0:  01 02 03 04 04 08 04 00 00 00 00 00 00 00 be af
new block 0:  00 70 07 00 77 08 04 00 00 00 00 00 00 00 be af
#db# halt error. response len: 1
old UID:01 02 03 04
new UID:00 70 07 00
proxmark3> hf search

UID : 00 70 07 00
ATQA : 00 04
SAK : 08 [2]
TYPE : NXP MIFARE CLASSIC 1k | Plus 2k SL1
proprietary non iso14443-4 card found, RATS not supported
#db# halt error. response len: 1
Chinese magic backdoor commands (GEN 1a) detected
Prng detection: WEAK

Valid ISO14443A Tag Found - Quiting Search

proxmark3>