Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2011-03-11 17:25:03

sargun
Member
Registered: 2011-02-09
Posts: 2

Proxmark not working for any HF tasks

I recently bought a proxmark from hackable-devices, but my antenna sucked. I then bought an HF antenna from proxmark3.com. The antenna characteristics are:
proxmark3> hw tune
#db# Measuring antenna characteristics, please wait.
proxmark3>

# LF antenna:  0.00 V @   125.00 kHz
# LF antenna:  0.00 V @   134.00 kHz
# LF optimal:  0.00 V @ 12000.00 kHz
# HF antenna:  7.77 V @    13.56 MHz
# Your LF antenna is unusable.


I try to get a read on the card and this happens:
proxmark3> hf 14a reader
read failed: could not detach kernel driver from interface 0: No data available(-19)!
Trying to reopen device...
[proxmark3 resets]

My Proxmark3 came flashed with this firmware:
proxmark3> hw version
#db# Prox/RFID mark3 RFID instrument
#db# bootrom: svn 442 2010-06-04 05:42:52
#db# os: svn 442 2010-06-04 05:42:54
#db# FPGA image built on 2009/12/ 8 at  8: 3:54

Offline

Board footer

Powered by FluxBB