Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2019-06-26 21:50:26

3dmann
Contributor
From: BRD- Deutschland
Registered: 2019-05-18
Posts: 43

I found out the AccessConditions "UserData": "05" so bit 9 is responsi

I found out the AccessConditions
"UserData": "05" so bit 9 is responsible for the door opening
but every door has "UserData": "05" as soon as I change it, the door does not open anymore and as soon as I enter "UserData": "06" the lamp lights up at the lock red at "UserData": "07" otherwise I get vom Lock no feedback.
I have read that the MIFARE Classic UserData bit 9 is not used for card encryption synonymous with snief processes, I see the "UserData": "06" bit 9 not
However, there are other numbers than in "UserData": "05" where the door opens
see the snief process no errors in the output

Already have many other letters from A-F tried but no result up to the "UserData": "06" where the lamp turns red
does anyone have a tip

    "2": {
      "KeyA": "A0A1A2A3A4A5",
      "KeyB": "ABD42DD50E37",
      "AccessConditions": "78778805",
      "AccessConditionsText": {
        "block8": "rdAB wrB",
        "block9": "rdAB wrB",
        "block10": "rdAB wrB",
        "block11": "wrAbyB rdCbyAB wrCbyB wrBbyB",
        "UserData": "05"

Last edited by 3dmann (2019-06-26 22:03:14)

Offline

#2 2019-06-27 05:22:21

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: I found out the AccessConditions "UserData": "05" so bit 9 is responsi

Good find!

User data byte, you can set ot to what ever you like if the sector trailer (ST) access rights allows it.
When simulation or on a magic uid card,  its usually no limits.   I have a hard time understanding your english so I am not sure what you actually is asking for.

btw, there is no garanti that the system changes the user data byte once you present your card to the reader. ie rewoking.

Offline

#3 2019-06-28 18:14:53

3dmann
Contributor
From: BRD- Deutschland
Registered: 2019-05-18
Posts: 43

Re: I found out the AccessConditions "UserData": "05" so bit 9 is responsi

1 question
Is there a way to change the UID of the card as well as kay?
2 question
is there a general key to create the UID for MIFARE Classic1k?
3 question
gives a program to the UID Incl. kay to deliver?

4 question
meaning of each default_keys.dic

Last edited by 3dmann (2019-06-28 21:54:35)

Offline

Board footer

Powered by FluxBB