Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2019-06-20 02:34:52

tayuto
Contributor
Registered: 2017-03-02
Posts: 5

[RDV4] iclass on RDV4

Hi,

I was planning to purchase a RDV 2 to do some research on iclass after I found the PM3 Easy hardly communicate with the fobs.

It seems the latest version of PM3 is RDV 4. Does anyone have any experience working with iclass on RDV4? I know the RDV2 antenna still have some issues reading iclass fobs (You need to hold the fob 1-2cm away from the antenna). Are they solved in RDV4?

Thanks.

Offline

#2 2019-06-20 19:29:43

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: [RDV4] iclass on RDV4

The 99% of the devices nowdays works with iClass if you buy an original. The cheapest Proxmark3 Easy (RDV3.0) clones found everywhere have hardware issues.  Not all of them but many.  Buying a clone is a gamble.

RDV2 is still a great model.  Otherwise its just a firmware question. Use latest Offical repo since it has good iClass support.

Offline

Board footer

Powered by FluxBB