Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2013-04-26 10:07:18

asper
Contributor
Registered: 2008-08-24
Posts: 1,409

Commands, subcommands and parameters full list

This link (updatet to r702) contains a .docx document in which are described all the 4 main Proxmark3 client commands: HF, LF, HW and DATA including subcommands and spcific parameters (all taken from the pm3 client help screens).
Here it is a screenshot:
capturemnf.png
This file can be useful to rapidly learn what command you can need and what parameters are required to run it properly.

Last edited by asper (2013-04-27 07:52:46)

Offline

#2 2013-05-21 10:55:40

C0Y0-Ck3r
Contributor
Registered: 2012-11-08
Posts: 87

Re: Commands, subcommands and parameters full list

A big thanks to you !! I was thinking of doing a tutorial about it !!

Offline

#3 2013-05-21 11:03:20

asper
Contributor
Registered: 2008-08-24
Posts: 1,409

Re: Commands, subcommands and parameters full list

Thank you for your support !

Well, in our GUI all commands are explained with all the help "screens" and also the tool (GUI) is updated, this .doc probably will never be, it was only useful to begin our software project and it seems it was useful at last looking at what we were able to pull out wink

Last edited by asper (2013-05-21 11:04:41)

Offline

#4 2018-05-21 05:02:02

Elsin10
Contributor
Registered: 2018-02-27
Posts: 41

Re: Commands, subcommands and parameters full list

Can you please reupload the file ?

It says:

"Sorry, the file you requested is not available.
Possible reasons include:

- File date limit has expired.
- File was not successfully uploaded.

It is not possible to restore the file. Please contact the uploader and ask them to upload the file again."

Thank in adv

Offline

#5 2018-05-30 01:30:52

0xFFFF
Administrator
From: Vic - Australia
Registered: 2011-05-31
Posts: 632

Re: Commands, subcommands and parameters full list

Please go here or here.

Offline

Board footer

Powered by FluxBB