Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2010-05-06 18:51:36

mrbrt
Member
From: localhost
Registered: 2010-04-25
Posts: 4

internal impedance of proxmark3 antenna port

Sorry if this has been answered before, but I looked through the boards and parts of the manual and couldn't really find a definitive answer. 

does anyone know the internal impedance of the proxmark3 on the antenna ports? also I'm curious as to whether anyone has checked out good working antennas designs in a network analyzer to determine what a good matching impedance is (discounting parasitics)? I'm interested in designing a better performance antenna for the 13.5Mhz tags than the coil of wire you massage to get to work.

Offline

Board footer

Powered by FluxBB