Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Hi Iceman/all,
It is possible to write ultralight dump data into normal classic 1k card?
How do I change classic 1k card type (ATQA, SAK) into Ultralight?
pm3 --> hf 14a reader
UID : 04 47 BB 6A CC 48 81
ATQA : 00 44
SAK : 00 [2]
TYPE : MIFARE Ultralight EV1 48bytes (MF0UL1101)
MANUFACTURER : NXP Semiconductors Germany
proprietary non iso14443-4 card found, RATS not supported
Answers to magic commands (GEN1): NO
Last edited by earlneo (2016-10-13 16:50:39)
Offline
I think you fail to understand that the UL-EV1 is a different kind of tag which has commands that a Mifare Classic S50 doesn't have. So even if you can write the dumped values from a UL-ev1 tag on to a s50, it will not be able to pass as such tag.
Offline
Even on magic card?
Offline
If you don't belive me, read the manuals instead and make up your own mind about it.
Offline
i believed you iceman. thanks. looks like my friend have to purchase UL-EV1 stock card instead.
Price for UL-EV1 card is higher than Classic 1k card due to the demand for classic 1k is higher. Too bad.
Offline