Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2020-04-20 00:44:44

Misko2468
Contributor
Registered: 2020-04-19
Posts: 11

Bluetooth Battery

I had a question regarding the battery pack, after 2.5 grueling hours I got Proxspace to work & notice my Proxmark3 RDV4, everything seems to load fine. However when I installed the "drivers" to the Proxmark I just realized I had the "bluetooth battery" attached, is their something else I'm supposed to do, as well is their any reference I can read about this?

If I can't figure it out I may just replace it with the regular cap & start with it plugged in to a battery pack.

Offline

#2 2020-04-20 05:01:05

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: Bluetooth Battery

Depends, if you wanna use the bt ,  then you will need to compile the fw to support it.
https://github.com/RfidResearchGroup/pr … --flashing

If you wanna use the android app RRG Rfidtool,  you will need a custom fw,  follow the directions in that repo.

And if you don't wanna use the addon,  leave it on anyway, it doesn't hurt your experience having it on. Its all up to you.
I would leave it on.

Offline

#3 2020-04-20 05:22:25

Misko2468
Contributor
Registered: 2020-04-19
Posts: 11

Re: Bluetooth Battery

Alright I'll leave it on, & look into the BT.

Offline

Board footer

Powered by FluxBB