Proxmark3 community

Chris3100

Contributor

Registered: 2020-02-20

Posts: 3

Sticker Tag

Has anyone seen this 13.56Mhz tag before?

https://pasteboard.co/IVzDxJG.jpg

I tried reading with HF search and hf Search u. And I don't get any hits.

Edit: I also know it is 13.56mhz because the reader control box has a Fcc number and it is registered for 13.56 Mhz

I seen that other people have difficulties reading iclass tags... I am not to sure if it could be that.

I use Hf tune to monitor the voltage drop on the coil. When I see the lowest voltage drop sometimes I read the tag and it says iclass detected. Though, all the information seems to change.

Last edited by Chris3100 (2020-02-20 16:57:12)

Ollibolli

Contributor

Registered: 2019-04-27

Posts: 51

Re: Sticker Tag

Have you tryed to play a little bit with the distance between tag and reader?

Chris3100

Contributor

Registered: 2020-02-20

Posts: 3

Re: Sticker Tag

Yes, I used a hackrf looked at the water fall and can only see the peak from the proxmark3. I don't see anything from the card.

Do some tags have a wake up command?

(very new to this)