Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2019-01-06 01:01:28

over06
Contributor
Registered: 2019-01-04
Posts: 2

Cloning Viking RFID tag with ID only

Hello all members.

This is my first request about 125 khz RFID tag cloning.
Maybe my first post will be stupid but I need your help.

I'm using Proxmark3 with Kali Linux 2018 version.
I have succeeded in cloning an Urmet Starprox Captiv 125 khz Viking chip embedded ID: 1200103C5E (in hands) with this commands:

lf search (with original tag)

lf viking clone 1200103C5E 1 (with T5577 tag)

I have tested the T5577 clone on the building entrance door and it works immediatly

Now, I want to know how to cloning the same type of tag (without in hands) with the ID written on his back only.

I hope my english will be readable enough because I'm french.

Thanks.

Offline

#2 2019-03-06 12:06:40

loupetre
Contributor
Registered: 2019-01-21
Posts: 29

Re: Cloning Viking RFID tag with ID only

hello,
On your first tag, what was the ID written on its back ? 1200103C5E ?

Offline

Board footer

Powered by FluxBB