Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2018-05-15 04:57:01

Elsin10
Contributor
Registered: 2018-02-27
Posts: 41

[SOLVED] Problem with flashing bootrom

I keep getting this message while i try to flash the bootrom 'flasher.exe' is not recognized as an internal or external command, an operable program or a batch file
press any key to continue...

It wont continue from there.

[Edit]
Was using the wrong method to flash the bootrom.
The method that i was using is to update to the new CDC Serial Interface, which i assume i dont need since i bought pm3 online.

Last edited by Elsin10 (2018-05-16 08:13:48)

Offline

Board footer

Powered by FluxBB