Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#51 2014-09-05 05:12:43

Fire_crow
Contributor
Registered: 2014-09-05
Posts: 5

Re: ProxMark3 Turn off while "hf mf mifare"

i have the some problem mi pm3 is form xfpga do you have any solution ?

Offline

#52 2014-09-05 06:21:47

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: ProxMark3 Turn off while "hf mf mifare"

What version of the firmware do you have?
Could you do the following  and paste it here.

hw ver
hw tune
hf 14a read

Offline

#53 2014-09-05 06:28:05

Fire_crow
Contributor
Registered: 2014-09-05
Posts: 5

Re: ProxMark3 Turn off while "hf mf mifare"

hello, thanks for reply


Connected units:
        1. SN: ChangeMe [bus-0/\\.\libusb0-0001--0x9ac4-0x4b8f]
proxmark3> hw ver
#db# Prox/RFID mark3 RFID instrument
#db# bootrom: svn 651 2013-01-31 14:52:23
#db# os: svn 651 2013-01-31 14:52:31
#db# FPGA image built on 2012/ 1/ 6 at 15:27:56
proxmark3> hw tune
#db# Measuring antenna characteristics, please wait..
#db# Measuring complete, sending report back to host

# LF antenna:  0.00 V @   125.00 kHz
# LF antenna:  0.00 V @   134.00 kHz
# LF optimal:  0.27 V @   150.00 kHz
# HF antenna: 10.96 V @    13.56 MHz
# Your LF antenna is unusable.
proxmark3> hf 14a read
ATQA : 04 00
UID : 35 ed b3 b4 00 00 00 00 d9 21 93 69
SAK : 08 [2]
SAK : NXP MIFARE CLASSIC 1k | Plus 2k
proprietary non-iso14443a card found, RATS not supported
proxmark3>

Offline

#54 2014-09-05 08:40:50

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: ProxMark3 Turn off while "hf mf mifare"

651,..  You should flash the latest firmware on to your PM3. 
This will most likely solve your problem.

Offline

#55 2014-09-07 07:26:16

Fire_crow
Contributor
Registered: 2014-09-05
Posts: 5

Re: ProxMark3 Turn off while "hf mf mifare"

i am trying with pm3-bin-756 (cdc+lua).rar  but when i open proxmak.exe this close instantly (run as administrator), i need flash my proxmark first?

Offline

#56 2014-09-07 09:43:24

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: ProxMark3 Turn off while "hf mf mifare"

the safest way of dealing with problems with the proxmark is...

download latest software (v0.0.2), (compile it), flash it,  try it and see what kind of problems is left.

Offline

#57 2014-09-07 21:52:55

Fire_crow
Contributor
Registered: 2014-09-05
Posts: 5

Re: ProxMark3 Turn off while "hf mf mifare"

excuse my ignorance but where I can desgarcar version 0.0.2? you have any tutorial how to do it?

I'm trying

chk hf mf * 1? xxxxxxxxxxxx

the key was obtained with snoop


Connected units:
         1 SN: ChangeMe [bus-0 / \\ \ libusb0-0001--0x9ac4-0x4b8f.]
proxmark3> hf mf chk * 1? xxxxxxxxxxxx
chk key [0] xxxxxxxxxxxx
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
Found valid key: [xxxxxxxxxxxx]
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
--SectorsCnt: x block no: 0xxx key type: x key count: 1
proxmark3> et, keycnt: 1

i dont know how to use nested with the key found, you can help me?

Offline

#58 2014-09-07 22:16:49

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: ProxMark3 Turn off while "hf mf mifare"

If you just run  "hf mf nested"   it will give you the help texts.  It will help you with the right syntax to run it properly.

If you look into this thread:  http://www.proxmark.org/forum/viewtopic.php?id=1562&p=1
you can download 0.0.2 for windows.
Otherwise just download the source code and compile it.

Offline

#59 2014-09-08 02:08:08

Fire_crow
Contributor
Registered: 2014-09-05
Posts: 5

Re: ProxMark3 Turn off while "hf mf mifare"

many thanks iceman, understand how to run nested, but do not know the number of the sector where I recovered with hf mf chk * 1? .
ex.  hf mf nested x x x xxxxxxxxxxxx ?

Offline

#60 2014-09-08 05:56:04

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: ProxMark3 Turn off while "hf mf mifare"

In your output it says found key when tried sector x...

Offline

#61 2014-09-08 05:57:12

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: ProxMark3 Turn off while "hf mf mifare"

and block 0xxx (hex) = x (decimal)

Offline

#62 2014-10-12 23:18:32

MilkThief
Contributor
Registered: 2014-04-11
Posts: 104

Re: ProxMark3 Turn off while "hf mf mifare"

Fire_crow wrote:

i have the some problem mi pm3 is form xfpga do you have any solution ?

do you figured out the issue? me not.
I bought an american PM3 (proxmark.com) and it works fine. Same FW, same antenna, same PC and user brain: american works 100%, chineese don't work. They said maybe a connection issue between µC and FPGA... And 2 of 2 pcb are broken. No more XFPGA!

Offline

#63 2014-11-22 14:09:17

Omikron
Contributor
Registered: 2010-02-12
Posts: 78

Re: ProxMark3 Turn off while "hf mf mifare"

I am also experiencing my pm3 resetting during the "hf mf mifare" command, between 8 and 15 seconds in.

[== Undefined ==]
proxmark3> hw version
#db# Prox/RFID mark3 RFID instrument
#db# bootrom: master/v1.1.0-37-gca4714c-suspect 2014-11-16 18:59:33
#db# os: master/v1.1.0-37-gca4714c-dirty-suspect 2014-11-16 21:01:14
#db# HF FPGA image built on 2014/ 6/19 at 21:26: 2
uC: AT91SAM7S256 Rev B
Embedded Processor: ARM7TDMI
Nonvolatile Program Memory Size: 256K bytes
Second Nonvolatile Program Memory Size: None
Internal SRAM Size: 64K bytes
Architecture Identifier: AT91SAM7Sxx Series
Nonvolatile Program Memory Type: Embedded Flash Memory
proxmark3>

I've been using this PM3 for many years and it was built a long time ago by a colleague and performed consistently over it's life, so I don't think it has any hardware issues (yet).

Has anyone figured out where in the code this bug was introduced?

Offline

#64 2014-11-22 15:41:52

zhans
Member
Registered: 2014-11-22
Posts: 2

Re: ProxMark3 Turn off while "hf mf mifare"

"hf mf mifare" hang... is same problem here.. with only one my card.

mostly cards is ok

proxmark3> hw version
#db# Prox/RFID mark3 RFID instrument
#db# bootrom: /-suspect 2014-09-19 10:31:37
#db# os: /-suspect 2014-09-13 11:21:04
#db# HF FPGA image built on 2014/ 6/19 at 21:26: 2
uC: AT91SAM7S256 Rev D
Embedded Processor: ARM7TDMI
Nonvolatile Program Memory Size: 256K bytes
Second Nonvolatile Program Memory Size: None
Internal SRAM Size: 64K bytes
Architecture Identifier: AT91SAM7Sxx Series
Nonvolatile Program Memory Type: Embedded Flash Memory
proxmark3>

Offline

#65 2015-02-14 05:19:43

laser
Contributor
Registered: 2011-06-23
Posts: 24

Re: ProxMark3 Turn off while "hf mf mifare"

Hi,

Use the R852 firmware can work for "hf mf mifare". it take about 1-2 minute.
http://xfpga.com/download/r852.zip

1423887714_hf_mf_mifare.png

Last edited by laser (2015-02-14 05:22:01)

Offline

#66 2015-02-14 12:23:05

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: ProxMark3 Turn off while "hf mf mifare"

Have you all tested "hf mf mifare" with the latest sourcecode from GitHub?

Offline

#67 2015-04-06 02:21:31

Omikron
Contributor
Registered: 2010-02-12
Posts: 78

Re: ProxMark3 Turn off while "hf mf mifare"

iceman wrote:

Have you all tested "hf mf mifare" with the latest sourcecode from GitHub?

Still broken.

Offline

#68 2015-04-06 08:11:45

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: ProxMark3 Turn off while "hf mf mifare"

do you know which version of the code where it breaks for you?   R852 works,  but if you go backwards from the github or Aspers pre-compiled releases it would help very much to pinpoint it.

Offline

#69 2015-04-07 02:05:34

Omikron
Contributor
Registered: 2010-02-12
Posts: 78

Re: ProxMark3 Turn off while "hf mf mifare"

iceman wrote:

do you know which version of the code where it breaks for you?   R852 works,  but if you go backwards from the github or Aspers pre-compiled releases it would help very much to pinpoint it.

Unfortunately, I do not.  It's been broken for a loooong time based on the timestamps of the posts in this thread.  I suspect that the last time it worked was before the big re-write that changed the bootloader, but I haven't confirmed that.  The problem for me is that OS X compiling was finicky/broken for quite a while so I do not have an easy way to recompile old versions as I am not particularly excited about creating a new dev environment just so I can compile old broken versions.

If someone has a linux environment with a more flexible development environment that can easily compile older versions, perhaps they would be willing to help isolate when it broke.

Last edited by Omikron (2015-04-07 02:06:00)

Offline

#70 2015-04-07 07:34:45

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: ProxMark3 Turn off while "hf mf mifare"

bummer,  hard to find the bug then.

Offline

#71 2019-08-06 20:58:21

pbtek
Contributor
Registered: 2019-04-05
Posts: 39

Re: ProxMark3 Turn off while "hf mf mifare"

looks like you have a card like mine.... coincidence?
please check topic
http://www.proxmark.org/forum/viewtopic.php?pid=36042
i am stuck

0x38F wrote:

hf mf nested is not helpful ; I think that I will have to snoop to keep progress

|---|----------------|---|----------------|---|
|sec|key A           |res|key B           |res|
|---|----------------|---|----------------|---|
|000|  a0a1a2a3a4a5  | 1 |  b0b1b2b3b4b5  | 1 |
|001|  a0a1a2a3a4a5  | 1 |  000000000000  | 0 |
|002|  a0a1a2a3a4a5  | 1 |  000000000000  | 0 |
|003|  a0a1a2a3a4a5  | 1 |  000000000000  | 0 |
|004|  a0a1a2a3a4a5  | 1 |  000000000000  | 0 |
|005|  a0a1a2a3a4a5  | 1 |  000000000000  | 0 |
|006|  a0a1a2a3a4a5  | 1 |  b0b1b2b3b4b5  | 1 |
|007|  a0a1a2a3a4a5  | 1 |  b0b1b2b3b4b5  | 1 |
|008|  a0a1a2a3a4a5  | 1 |  b0b1b2b3b4b5  | 1 |
|009|  a0a1a2a3a4a5  | 1 |  b0b1b2b3b4b5  | 1 |
|010|  a0a1a2a3a4a5  | 1 |  b0b1b2b3b4b5  | 1 |
|011|  a0a1a2a3a4a5  | 1 |  b0b1b2b3b4b5  | 1 |
|012|  a0a1a2a3a4a5  | 1 |  b0b1b2b3b4b5  | 1 |
|013|  a0a1a2a3a4a5  | 1 |  b0b1b2b3b4b5  | 1 |
|014|  a0a1a2a3a4a5  | 1 |  b0b1b2b3b4b5  | 1 |
|015|  a0a1a2a3a4a5  | 1 |  b0b1b2b3b4b5  | 1 |
|---|----------------|---|----------------|---|

Offline

#72 2019-08-12 19:46:56

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: ProxMark3 Turn off while "hf mf mifare"

try hardnested if nested fails,  or run nested several times.

Offline

Board footer

Powered by FluxBB