Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2012-01-10 09:56:22

laser
Contributor
Registered: 2011-06-23
Posts: 24

How to make a 13.56MHz antenna

1. cut a 80cm length small wire(Enameled wire, QiBaoXian in Chinese).

2. strip the skin a little and connect to the TP3 and TP4.

3. wire 3 rings, about 8cm in diameter.

This kind of antenna work perfect and easy to make, the voltage is about 12v or more.

FluxBB bbcode test

FluxBB bbcode test



-----------------------------------------------------------
GeZhi Electronic Co, Ltd
http://www.xfpga.com
proxmark3 and other rfid product
PCB manufacture and OEM service
email: gezhitech@163.com or laser21@163.com
Tel: 086-13113330725
QQ: 1074079485
-----------------------------------------------------------

Offline

#2 2012-06-25 21:52:07

edo1
Contributor
Registered: 2012-05-02
Posts: 18

Re: How to make a 13.56MHz antenna

laser wrote:

1. cut a 80cm length small wire(Enameled wire, QiBaoXian in Chinese).

why 80cm?

3. wire 3 rings, about 8cm in diameter.

why 3 rings and 8cm?

I have this antenna, it works. But it is not good enough for eavesdropping.
May be another configuration will be better?

Offline

Board footer

Powered by FluxBB