Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2019-10-19 03:11:53

aaronml
Contributor
Registered: 2018-01-02
Posts: 30

[solved] hf list 14a hangs / times out

Hi there,

I have an RDV2 PM3, and while I can run "hf 14a snoop" (or hf 14a sniff on the iceman fork, I've tried both), the subsequent "hf list 14a" command hangs / times out.

I've tried with both 3.1.0 vanilla firmware as well as a semi-recent Iceman fork build (Git hash f55a572) and end up with the same result.

Any thoughts on what the issue could be? Since the issue occurs in both vanilla and Iceman-fork firmware, maybe it's a hardware issue with my PM3?

Last edited by aaronml (2019-10-28 16:03:47)

Offline

#2 2019-10-19 11:25:26

piwi
Contributor
Registered: 2013-06-04
Posts: 704

Re: [solved] hf list 14a hangs / times out

Looks like your client software and firmware are from different versions or repositories. Client software and firmware must match.

Offline

#3 2019-10-19 16:30:45

aaronml
Contributor
Registered: 2018-01-02
Posts: 30

Re: [solved] hf list 14a hangs / times out

piwi wrote:

Looks like your client software and firmware are from different versions or repositories. Client software and firmware must match.

They do match. When I use the Iceman fork client build, I flash my PM3 with that FW. When using vanilla 3.1.0, I flash that FW specifically.

Offline

#4 2019-10-19 20:41:32

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: [solved] hf list 14a hangs / times out

You could also try RRG/Iceman repo,   compile it for PM3OTHER.  Flash bootrom/fullimage. Your RDV2 should be working all nice with sniffing 14A.  Thought you were sniffing iClass wink

Offline

#5 2019-10-19 22:05:15

piwi
Contributor
Registered: 2013-06-04
Posts: 704

Re: [solved] hf list 14a hangs / times out

You did press the Pm3 button to stop snooping?

Offline

#6 2019-10-20 16:03:48

aaronml
Contributor
Registered: 2018-01-02
Posts: 30

Re: [solved] hf list 14a hangs / times out

piwi wrote:

You did press the Pm3 button to stop snooping?

Yikes sad that was it. Thanks!

Last edited by aaronml (2019-10-20 16:04:12)

Offline

#7 2019-10-20 16:05:58

aaronml
Contributor
Registered: 2018-01-02
Posts: 30

Re: [solved] hf list 14a hangs / times out

iceman wrote:

You could also try RRG/Iceman repo,   compile it for PM3OTHER.  Flash bootrom/fullimage. Your RDV2 should be working all nice with sniffing 14A.  Thought you were sniffing iClass wink

Heh, thanks! iCLASS SE Reader Config Cards, which are JCOP-based tongue

Offline

#8 2019-10-28 08:40:59

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: [solved] hf list 14a hangs / times out

Good,  I suggest you edit your first post and add the prefix [solved] to your subject line.

Offline

#9 2019-10-28 16:04:11

aaronml
Contributor
Registered: 2018-01-02
Posts: 30

Re: [solved] hf list 14a hangs / times out

iceman wrote:

Good,  I suggest you edit your first post and add the prefix [solved] to your subject line.

Just did that, thanks!

Offline

Board footer

Powered by FluxBB