Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2019-08-19 22:32:09

l07tb0y
Contributor
Registered: 2019-08-12
Posts: 9

Two questions about ProxMark3

So I am still reading through some stuff but thought I ask you guys first

1. If I am in standalone mode and I record a TAG. If I turn off the device (I have the battery and bluetooth module) does the memory get wiped? and if it does not get wiped how can I get to the memory banks to simulate cards?

2. I am at a Resort that rhymes with Shamisney and I scanned their room tag it come up as the following

[fpc] pm3 --> hf search
[=] Checking for known tags...
         
UID : 36 0F A0 4D           
ATQA : 00 04         
SAK : 08 [2]         
TYPE : NXP MIFARE CLASSIC 1k | Plus 2k SL1 | 1k Ev1         
[=] proprietary non iso14443-4 card found, RATS not supported         
[=] Answers to magic commands: NO           
[+] Prng detection: HARD           
         
[+] Valid ISO14443-A tag  found

can I record this card and play back?

Offline

#2 2019-08-20 16:22:29

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: Two questions about ProxMark3

Only two standalone modes takes advantage of the new external flash memory to persist during power off.  HF_COLIN/HF_BOG  both HF.
Since you don't say which standalone mode you are using,  I can only assume you use lf_samyrun.   which only uses ram.

so many guides/blogs/videos/forumposts on hardnested,  start searching.

Offline

Board footer

Powered by FluxBB