Proxmark3 developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2009-07-08 10:52:55

szymonunion
Contributor
Registered: 2009-07-05
Posts: 46

List of needed chips/parts to be assembled on PCB ???

Guys,

maybe I am blind, but I cannot find on forum nor in the files section list of needed chips/parts to be assembled on PCB.
I just sent question to local company with schema I found here http://www.proxmark.org/files/index.php … tchpcb.zip. I will check how much it is here - I asked them for quotation 1-2 PCB's and 3-5 PCB's smile)) I will let you know guys.


Regards,

--
SzYmOn

Offline

#2 2009-07-08 22:46:28

d18c7db
Contributor
Registered: 2008-08-19
Posts: 292

Re: List of needed chips/parts to be assembled on PCB ???

It's in the proxmark3-may23-2007.zip file in the files section http://www.proxmark.org/files/index.php?dir=J.Westhues

Open the zip file and look in the doc/proxmark3.xls

There was an updated xls file that theqlabs did as some of the Digikey part numbers had changed but the above is a good start.

Offline

#3 2009-07-08 23:24:36

szymonunion
Contributor
Registered: 2009-07-05
Posts: 46

Re: List of needed chips/parts to be assembled on PCB ???

d18c7db,

thx 4 info. I was looking for the last one file I mean as new as possible. I read some topic here on this forum with link to site of theqlabs, but that link (to XLS file) was not working. Fortunately I got answer from theqlabs today regarding assembled/tested device so I will ask him about new XLS file.


Regards,

--
SzYmOn

Offline

#4 2009-08-02 18:06:40

karlthegreat
Member
Registered: 2009-07-29
Posts: 1

Re: List of needed chips/parts to be assembled on PCB ???

Hi, i want to build a proxmark for myself, i have question what type of relay should be used. (in the .xls file it just says its an smd relay from newark) It would be helpfull to get a part number or the reading of the relay from an assembled proxmark.

Offline

#5 2009-08-02 20:58:48

d18c7db
Contributor
Registered: 2008-08-19
Posts: 292

Re: List of needed chips/parts to be assembled on PCB ???

Z827-ND from Digikey

Offline

#6 2014-04-17 17:33:33

dean-brinkman
Member
Registered: 2014-04-17
Posts: 2

Re: List of needed chips/parts to be assembled on PCB ???

d18c7db wrote:

Z827-ND from Digikey

so where do you keep the update parts list
AND IT IS ONLY DIGIKEY PART NUMBER THAT CHANGED NOT THE ACTUEL PART ???

Offline

Board footer

Powered by FluxBB